A screen for powders and surface wipe screening for Ketamine which provides a rapid 5-10 minute on-site screen. The dip strip format for ease of use
Screens powders and surface residues for Ketamine
Ketamine 1000ng/ml
How to use the Ketamine powder and surface wipe drug test DKE-X14
It is always advisable to read the detailed instructions supplied with the Ketamine test kit, and make sure you understand them before starting the test. A timer is also helpful.
Remove the ketamine test kit from the foil and take the cap off. Keep the cap that you have removed nearby, as it is required in a later step.
Hold the ketamine test kit so that the prong is facing downwards
If you are using the test kit as a surface test then wipe the prong that sticks out thoroughly across the surface that you wish to test.
If you wish to test a solid, crush it into a fine powder and wipe the prong through the powder.
Now, fill the device cap that you removed from the test with cold tap water
Keeping the cap upright so as not to spill the tap water, carefully put the prong into the cap so that it can absorb the water and leave it there for 10-15 seconds in the upright position.
You should now be able to see a pink colour appear within the window on the test kit
Make sure the cap is secure and lay the test kit flat. Set your timer for 10 minutes.
